Xerox workcentre 7345 manual pdf

Note: If Authentication is enabled, as stated in the Security — Authentication topic in the Options section of this guide, you will have to supply the Administrator User Name and Password when first accessing Internet Services, rather than supplying these credentials after configuring individual features with Internet Services. For further details on the many functions provided by the Internet Services Web Pages, refer to the Internet Services section of this guide.

To access Internet Services Settings at the Device 1. Press Port Settings. When the Port Settings menu displays, press the down arrow key to view additional selections. Press the Change Settings button in the lower right corner of the Port Settings menu screen. After pressing the selection line, to access available settings press the Change Settings button in the lower right corner of the touch screen. Add page 18 to Favourites. Press the selection line labeled Port Status. On the Port Status screen, note which of the two buttons is highlighted as the current setting for Internet Services Enablement.

The available settings are Enabled or Disabled. To exit the screen, without making any changes, press the Cancel button. Internet Services Port Number 1. Press the selection line labeled Internet Services Port Number. On the Port Number screen, use the supplied keypad to enter the appropriate port number default of To change settings, press the Save button. To exit the Port Settings menu, returning to the Devices Tools tab screen, press the rectangular Close button in the upper right corner of the Port Settings menu screen.

Note: If you changed any settings in the Port Settings menu, the Device will automatically reboot to register and enable your new settings. Add page 19 to Favourites. Press Enter. Click the Properties Tab. Select Proxy Server Settings in the list of hot links. Place a checkmark in the Use Proxy Server checkbox. Functioning like the local address exception list in a typical web browser, these addresses will be permitted to bypass the Proxy Server. A fully qualified domain name or IP address can be used.

If you are using a different port number, enter it in the available box. Check the Authentication box if client authentication is required for the Proxy Server.

Enter the Login Name for access to the proxy server. Up to 32 characters can be entered. Enter the Password for access to the proxy server. Click Apply. Add page 20 to Favourites. Quick Scan Features Setup Guide. Functional Posters. Interactive User Guide. Contains English, Romanian, Russian, and Turkish languages. System Administrator Guide. Interactive User Guide - downloadable version. Readme For Windows Print Driver version 5.

Readme file to explain installation and solutions to known issues. Customer Tips - English Only. Need more support? On the Parallel Port selections menu, press the selection line labeled Bi-directional communications. On the settings screen, note which of the two buttons is highlighted as the current setting for Bi- Directional Communications. To support high speed, bi-directional parallel communications, select the Enabled setting. Input to Prime 1. Select the down arrow on the screen to see this selection.

On the Parallel Port selections menu, press the selection line labeled Input Prime. On the settings screen, note which of the two buttons is highlighted as the current setting for Parallel Input to Prime.

In support of bi-directional communications, input to prime enables or disables the communication of a control signal over the parallel port which is client workstation dependent. When in doubt, select the Enabled setting. To change settings, press the setting of choice, then click the Save button on the touch screen. Add page 24 to Favourites. To exit the Port Settings menu, returning to the Devices Tools tab screen, press the rectangular Close button in the upper right corner of the Ports Menu screen.

Wait several seconds and the Auto Clear service should log you out. Note: If you changed any settings in the Port Settings menu, the Device will automatically reboot to register and enable your new settings. Add page 25 to Favourites. To access this folder, enter the IP address of the device in the Address line of your browser and press Enter.

Click on the Properties tab, then click on the Physical Connections folder. Note that the Parallel Port and USB hot links need an optional kit installed before they can be displayed. Click on the USB hot link to view or change the Auto Eject Time, which is the length of time the Controller will wait for an end of job command before processing the job.

Add page 26 to Favourites. Once SNMP has been enabled at the device, SNMP Management software, running on a host computer connected to the network, polls the devices agents for operating information and responds to traps from the device regarding specific events. Examples of such events might be notifications from the device that it is low on toner, or low on paper. Press the 1 key on the numeric keypad five consecutive times. This is the factory default password.

Press Enter on the touch screen. Press the Machine Status button on the Control Panel. Press the Tools tab. Press Port Settings. Press the Change Settings button in the lower right corner of the Port Settings menu screen. When the SNMP selection menu displays, note that you have only one selection available on a single, numbered horizontal line, with the current status of this setting shown. The Close button in the upper right corner of the screen returns you to the Port Settings menu.