Could not activate cellular data network softbank

What to do when you encounter the com. Before you try the following solutions, you should turn on and off the Airplane Mode to check if the issue is caused by the connectivity issue. Here is how to check it:. Resetting network settings will update all information related to the network used on your phone. You can reset the network settings by following the steps below.

Go to your Settings and open the General option. Scroll down and click the Reset option. Simply, navigate to the Connection settings and check the access point name. Try to enable automatic mode and turn on the cellular data connection. If the network bar is low, then there is a high possibility that you could not activate cellular data networks. So, you cannot roam around to make the network connection stable. So, navigate to the Network Connection Settings.

You can see two options: Automatic and Manual network selection. It seems that you are out of your local area. So, tap on manual network selection. The network bar will wipe out and the cell phone network will try to select any available networks.

When the list of available networks is available, select the desired one. After that, turn on the cellular data and hopefully, it will successfully connect to the internet. If your SIM card is facing issues, then you might try some preliminary processes. Take out the SIM card and rub it with a fine piece of cloth. Insert back the SIM to the phone and try to connect. Interchange the SIM slots and try to connect. If the issue still exists, then you have nothing more to do.

First, ensure your area has cellular network coverage, then to check your data is switched on do the following:. Take out your SIM to inspect it as the card may be damaged or inserted incorrectly. Gently clean it by using a cotton swab or blow on it before reinserting. The steps are identical to activating data for an iPhone 12, but to recap:.

Gently clean it by using a cotton swab or blowing on it before reinserting. This error could be the result of a phone setting, a required cellular setting, or a software update.